Dell POWEREDGE M1000E - Manual (Page 588)

2-558
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show ipc
This example shows how to display the contents of the IPC retransmission queue:
Switch> show ipc queue
There are 0 IPC messages waiting for acknowledgement in the transmit queue.
There are 0 IPC messages waiting for a response.
There are 0 IPC messages waiting for additional fragments.
There are 0 IPC messages currently on the IPC inboundQ.
Messages currently in use : 3
Message cache size : 1000
Maximum message cache usage : 1000
0 times message cache crossed 5000 [max]
Emergency messages currently in use : 0
There are 2 messages currently reserved for reply msg.
Inbound message queue depth 0
Zone inbound message queue depth 0
This example shows how to display all the IPC session statistics:
Switch# show ipc session all
Tx Sessions:
Port ID Type Name
10000.7 Unicast MDFS RP:Statistics
port_index = 0 type = Unreliable last sent = 0 last heard = 0
Msgs requested = 180 Msgs returned = 180
10000.8 Unicast Slot 1 :MDFS.control.RIL
port_index = 0 type = Reliable last sent = 0 last heard = 0
Msgs requested = 0 Msgs returned = 0
Rx Sessions:
Port ID Type Name
10000.7 Unicast MDFS RP:Statistics
port_index = 0 seat_id = 0x10000 last sent = 0 last heard = 0
No of msgs requested = 180 Msgs returned = 180
10000.8 Unicast Slot 1 :MDFS.control.RIL
port_index = 0 seat_id = 0x10000 last sent = 0 last heard = 0
No of msgs requested = 0 Msgs returned = 0
This example shows how to display the status of the local IPC server:
Switch> show ipc status cumulative
IPC System Status
Time last IPC stat cleared :never
This processor is the IPC master server.
Do not drop output of IPC frames for test purposes.
1000 IPC Message Headers Cached.
Rx Side Tx Side
Total Frames 12916 608
0 0
Total from Local Ports 13080 574
Total Protocol Control Frames 116 17
Total Frames Dropped 0 0