Dell POWEREDGE M1000E - Manual (Page 60)

2-30
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
authentication host-mode
Switch(config)# authentication host-mode single-host
You can verify your settings by entering the show authentication privileged EXEC command.
Related Commands Command Description
authentication
control-direction Configures the port mode as unidirectional or bidirectional.
authentication event Sets the action for specific authentication events.
authentication
fallback Configures a port to use web authentication as a fallback method for clients
that do not support IEEE 802.1x authentication
authentication open Enables or disable open access on a port.
authentication order Sets the order of authentication methods used on a port.
authentication
periodic Enables or disable reauthentication on a port.
authentication
port-control Enables manual control of the port authorization state.
authentication
priority Adds an authentication method to the port-priority list.
authentication timer Configures the timeout and reauthentication parameters for an
802.1x-enabled port.
authentication
violation Configures the violation modes that occur when a new device connects to a
port or when a new device connects to a port after the maximum number of
devices are connected to that port.
show authentication Displays information about authentication manager events on the switch.