Aaa authorization network – Dell POWEREDGE M1000E User Manual
Page 35
2-5
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
aaa authorization network
aaa authorization network
Use the aaa authorization network global configuration command on the switch stack or on a
standalone switch to the configure the switch to use user-RADIUS authorization for all network-related
service requests, such as IEEE 802.1x per-user access control lists (ACLs) or VLAN assignment. Use
the no form of this command to disable RADIUS user authorization.
aaa authorization network default group radius
no aaa authorization network default
Syntax Description
Defaults
Authorization is disabled.
Command Modes
Global configuration
Command History
Usage Guidelines
Use the aaa authorization network default group radius global configuration command to allow the
switch to download IEEE 802.1x authorization parameters from the RADIUS servers in the default
authorization list. The authorization parameters are used by features such as per-user ACLs or VLAN
assignment to get parameters from the RADIUS servers.
Use the show running-config privileged EXEC command to display the configured lists of
authorization methods.
Examples
This example shows how to configure the switch for user RADIUS authorization for all network-related
service requests:
Switch(config)# aaa authorization network default group radius
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands
default group
radius
Use the list of all RADIUS hosts in the server group as the default authorization
list.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
show running-config
Displays the operating configuration. For syntax information, use this link to
the Cisco IOS Release 12.2 Command Reference listing page:
Select the Cisco IOS Commands Master List, Release 12.2 to navigate to
the command.