Dell POWEREDGE M1000E - Manual (Page 624)

2-594
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show mac address-table address
show mac address-table address
Use the show mac address-table address user EXEC command to display MAC address table
information for the specified MAC address.
show mac address-table address mac-address [interface interface-id] [vlan vlan-id] [ | {begin |
exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac address-table address command:
Switch# show mac address-table address 0002.4b28.c482
Mac Address Table
------------------------------------------
Vlan Mac Address Type Ports
---- ----------- ---- -----
All 0002.4b28.c482 STATIC CPU
Total Mac Addresses for this criterion: 1
mac-address Specify the 48-bit MAC address; the valid format is H.H.H.
interface interface-id (Optional) Display information for a specific interface. Valid interfaces
include physical ports and port channels.
vlan vlan-id (Optional) Display entries for the specific VLAN only. The range is 1
to 4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX1 This command was introduced.