Show platform pm – Dell POWEREDGE M1000E User Manual
Page 1036
C-26
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix C Cisco Catalyst Blade Switch 3130 and 3032 for Dell Show Platform Commands
show platform pm
show platform pm
Use the show platform pm privileged EXEC command to display platform-dependent port-manager
information.
show platform pm {counters | group-masks | idbs {active-idbs | deleted-idbs} | if-numbers |
link-status | platform-block | port-info interface-id | stack-view | vlan {info | line-state}
[ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
counters
Display module counters information.
group-masks
Display EtherChannel group masks information.
idbs {active-idbs |
deleted-idbs}
Display interface data block (IDB) information. The keywords have these
meanings:
•
active-idbs—Display active IDB information.
•
deleted-idbs—Display deleted and leaked IDB information.
if-numbers
Display interface numbers information.
link-status
Display local port link status information.
platform-block
Display platform port block information.
port-info interface-id
Display port administrative and operation fields for the specified interface.
stack-view
Display status information for the stack.
This keyword is supported only on stacking-capable switches.
vlan {info | line-state}
Display platform VLAN information. The keywords have these meanings:
•
info—Display information for active VLANs.
•
line-state—Display line-state information.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(40)EX1
This command was introduced.