Clear mac address-table – Dell POWEREDGE M1000E User Manual
Page 116
2-86
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
clear mac address-table
clear mac address-table
Use the clear mac address-table privileged EXEC command on the switch stack or on a standalone
switch to delete from the MAC address table a specific dynamic address, all dynamic addresses on a
particular interface, all dynamic addresses on stack members, or all dynamic addresses on a particular
VLAN. This command also clears the MAC address notification global counters.
clear mac address-table {dynamic [address mac-addr | interface interface-id | vlan vlan-id] |
notification}
Syntax Description
Defaults
No default is defined.
Command Modes
Privileged EXEC
Command History
Examples
This example shows how to remove a specific MAC address from the dynamic address table:
Switch# clear mac address-table dynamic address 0008.0070.0007
You can verify that the information was deleted by entering the show mac address-table privileged
EXEC command.
Related Commands
dynamic
Delete all dynamic MAC addresses.
dynamic address
mac-addr
(Optional) Delete the specified dynamic MAC address.
dynamic interface
interface-id
(Optional) Delete all dynamic MAC addresses on the specified physical port
or port channel.
dynamic vlan vlan-id
(Optional) Delete all dynamic MAC addresses for the specified VLAN. The
range is 1 to 4094.
notification
Clear the notifications in the history table and reset the counters.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
mac address-table notification
Enables the MAC address notification feature.
Displays the MAC address table static and dynamic entries.
show mac address-table notification
Displays the MAC address notification settings for all
interfaces or the specified interface.
Enables the Simple Network Management Protocol (SNMP)
MAC address notification trap on a specific interface.