Dell POWEREDGE M1000E User Manual
Page 983
B-67
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug platform tcam
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
log l2 {acl {input | output} |
local | qos}
Display Layer 2 field-based CAM look-up type debug messages. The
keywords have these meanings:
•
acl {input | output}—Display input or output ACL look-up debug
messages.
•
local—Display local forwarding look-up debug messages.
•
qos—Display classification and quality of service (QoS) look-up
debug messages.
l3 {acl {input | output} |
ipv6 {acl {input | output} |
local | qos | secondary} |
local | qos | secondary}
Display Layer 3 field-based CAM look-up type debug messages. The
keywords have these meanings:
•
acl {input | output}—Display input or output ACL look-up debug
messages.
•
ipv6 {acl {input | output} | local | qos | secondary}—Display
IPv6-based look-up debug messages. Options include displaying
input or output ACL look-up, local forwarding look-up,
classification and QoS look-up, or secondary forwarding look-up
debug messages.
•
local—Display local forwarding look-up debug messages.
•
qos—Display classification and quality of service (QoS) look-up
debug messages.
•
secondary—Display secondary forwarding look-up debug
messages.
read {reg | ssram | tcam}
Display hardware-memory-read debug messages. The keywords have
these meanings:
•
reg—Display hardware-memory-register read debug messages.
•
ssram—Display synchronous static RAM (SSRAM)-read debug
messages.
•
tcam—Display hardware-memory-read debug messages.
search
Display supervisor-initiated hardware-memory-search results debug
messages.
write {forw-ram | reg |
tcam}
Display hardware-memory-write debug messages. The keywords have
these meanings:
forw-ram—Display forwarding-RAM write debug messages.
reg—Display hardware-memory-register write debug messages.
tcam—Display hardware-memory-write debug messages.
Release
Modification
12.2(40)EX1
This command was introduced.