Debug sw-vlan – Dell POWEREDGE M1000E User Manual
Page 1001
B-85
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands
debug sw-vlan
debug sw-vlan
Use the debug sw-vlan privileged EXEC command to enable debugging of VLAN manager activities.
Use the no form of this command to disable debugging.
debug sw-vlan {badpmcookies | cfg-vlan {bootup | cli} | events | ifs | management | mapping |
notification | packets | redundancy | registries | vtp}
no debug sw-vlan {badpmcookies | cfg-vlan {bootup | cli} | events | ifs | management | mapping
| notification | packets | redundancy | registries | vtp}
Syntax Description
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
badpmcookies
Display debug messages for VLAN manager incidents of bad port manager
cookies.
cfg-vlan {bootup | cli}
Display config-vlan debug messages. The keywords have these meanings:
•
bootup—Display messages when the switch is booting up.
•
cli—Display messages when the command-line interface (CLI) is in
config-vlan mode.
events
Display debug messages for VLAN manager events.
ifs
See the
command.
management
Display debug messages for VLAN manager management of internal
VLANs.
mapping
Display debug messages for VLAN mapping.
notification
See the
command.
packets
Display debug messages for packet handling and encapsulation processes.
redundancy
Display debug messages for VTP VLAN redundancy.
registries
Display debug messages for VLAN manager registries.
vtp
See the
command.
Release
Modification
12.2(40)EX1
This command was introduced.