Show vlan access-map – Dell POWEREDGE M1000E User Manual
Page 710
2-680
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show vlan access-map
show vlan access-map
Use the show vlan access-map privileged EXEC command to display information about a particular
VLAN access map or for all VLAN access maps.
show vlan access-map [mapname] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes
Privileged EXEC
Command History
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show vlan access-map command:
Switch# show vlan access-map
Vlan access-map "SecWiz" 10
Match clauses:
ip address: SecWiz_Gi0_3_in_ip
ip address: SecWiz_Fa10_3_in_ip
Action:
forward
Related Commands
mapname
(Optional) Name of a specific VLAN access map.
| begin
(Optional) Display begins with the line that matches the expression.
| exclude
(Optional) Display excludes lines that match the expression.
| include
(Optional) Display includes lines that match the specified expression.
expression
Expression in the output to use as a reference point.
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
Displays information about all VLAN filters or about a particular VLAN or
VLAN access map.
Creates a VLAN map entry for VLAN packet filtering.
Applies a VLAN map to one or more VLANs.