Dell POWEREDGE M1000E User Manual
Page 132
2-102
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
deny (ARP access-list configuration)
Command History
Usage Guidelines
You can add deny clauses to drop ARP packets based on matching criteria.
Examples
This example shows how to define an ARP access list and to deny both ARP requests and ARP responses
from a host with an IP address of 1.1.1.1 and a MAC address of 0000.0000.abcd:
Switch(config)# arp access-list static-hosts
Switch(config-arp-nacl)# deny ip host 1.1.1.1 mac host 0000.0000.abcd
Switch(config-arp-nacl)# end
You can verify your settings by entering the show arp access-list privileged EXEC command.
Related Commands
Release
Modification
12.2(40)EX1
This command was introduced.
Command
Description
Defines an ARP access control list (ACL).
Permits ARP requests and responses from a host configured with a
static IP address.
permit (ARP access-list
configuration)
Permits an ARP packet based on matches against the DHCP bindings.
Displays detailed information about ARP access lists.