Dell POWEREDGE M1000E - Manual (Page 1032)

C-22
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix C Cisco Catalyst Blade Switch 3130 and 3032 for Dell Show Platform Commands
show platform mac-address-table
show platform mac-address-table
Use the show platform mac-address-table privileged EXEC command to display platform-dependent
MAC address table information.
show platform mac-address-table [aging-array | hash-table | mac-address mac-address] [vlan
vlan-id]] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support
representative while troubleshooting a problem. Do not use this command unless a technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
aging-array (Optional) Display the MAC address table aging array.
hash-table (Optional) Display the MAC address table hash table.
mac-address mac-address (Optional) Display the MAC address table MAC address information,
where mac-address is the 48-bit hardware address.
vlan vlan-id (Optional) Display information for the specified VLAN. The range is 1
to 4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX1 This command was introduced.