Dell POWEREDGE M1000E User Manual
Page 442
2-412
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
radius-server dead-criteria
Related Commands
Command
Description
dot1x critical (global configuration)
Configures the parameters for the inaccessible authentication
bypass feature.
dot1x critical (interface
configuration)
Enables the inaccessible authentication bypass feature on an
interface and configures the access VLAN to which the switch
assigns the critical port when the port is in the
critical-authentication state.
radius-server retransmit retries
Specifies the number of times that the switch tries to reach the
RADIUS servers before considering the servers to be
unavailable. For syntax information, select Cisco IOS Security
Command Reference, Release 12.2 > Server Security
Protocols > RADIUS Commands.
radius-server timeout seconds
Specifies the time in seconds during which the switch waits for
a RADIUS server to respond before the IEEE 802.1x
authentication times out. For syntax information, select Cisco
IOS Security Command Reference, Release 12.2 > Server
Security Protocols > RADIUS Commands.
show running-config
Displays the operating configuration. For syntax information,
use this link to the Cisco IOS Release 12.2 Command
Reference listing page:
Select the Cisco IOS Commands Master List, Release 12.2
to navigate to the command.