Dell POWEREDGE M1000E - Manual (Page 86)

2-56
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
boot helper-config-file
boot helper-config-file
Use the boot helper-config-file global configuration command on the switch stack or on a standalone
switch to specify the name of the configuration file to be used by the Cisco IOS helper image. If this is
not set, the file specified by the CONFIG_FILE environment variable is used by all versions of Cisco
IOS that are loaded. Use the no form of this command to return to the default setting.
boot helper-config-file filesystem:/file-url
no boot helper-config file
Syntax Description
Defaults No helper configuration file is specified.
Command Modes Global configuration
Command History
Usage Guidelines This variable is used only for internal development and testing.
Filenames and directory names are case sensitive.
This command changes the setting of the HELPER_CONFIG_FILE environment variable. For more
information, see
Appendix A, “Cisco Catalyst Blade Switch 3130 and 3032 for Dell Boot Loader
Commands.”
Related Commands
filesystem: Alias for a flash file system. Use flash: for the system board flash
device.
/file-url The path (directory) and helper configuration file to load.
Release Modification
12.2(40)EX1 This command was introduced.
Command Description
show boot Displays the settings of the boot environment variables.