Dell PowerEdge M605 - Manual (Page 82)

44 Command Groups
www
.dell.com | support.dell.com
PIM-DM Commands
show ipv6 ospf database database-
summary Displays the number of each type of LSA in the database
and the total number of LSAs in the database. PE
show ipv6 ospf interface Display the information for the IFO object or virtual
interface tables. PE
show ipv6 ospf interface brief Displays brief information for the IFO object or virtual
interface tables. PE
show ipv6 ospf interface stats Displays the statistics for a specific interface. UE
show ipv6 ospf interface vlan Displays OSPFv3 configuration and status information for
a specific vlan PE
show ipv6 ospf neighbor Displays information about OSPF neighbors. PE
show ipv6 ospf range Displays information about the area ranges for the
specified area identifier. PE
show ipv6 ospf stub table Displays the OSPF stub table. PE
show ipv6 ospf virtual-link Displays the OSPF Virtual Interface information for a
specific area and neighbor. PE
show ipv6 ospf virtual-link brief Displays the OSPFV3 Virtual Interface information for all
areas in the system. PE
trapflags Enables OSPF traps ROSV3
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
ip pimdm Enables the administrative mode of PIM-DM in the router. GC
ip pimdm mode Sets administrative mode of PIM-DM on an interface to
enabled. IC
ip pimdm query-interval Configures the transmission frequency of hello messages
between PIM enabled neighbors. IC
show ip pimdm Displays system-wide information for PIM-DM. PE
show ip pimdm interface Displays interface information for PIM-DM on the
specified interface. PE
show ip pimdm interface stats Displays the statistical information for PIM-DM on the
specified interface. UE
show ip pimdm neighbor Displays the neighbor information for PIM-DM on the
specified interface. PE
Command Description Mode*