Dell PowerEdge M605 - Manual (Page 45)

Command Groups 7
Clock Commands
show bridge address-table count Displays the number of addresses present in the Forwarding
Database. PE
show bridge address-table static Displays statically created entries in the bridge-forwarding
database. PE
show bridge multicast address-
table Displays Multicast MAC address table information. PE
show bridge multicast filtering Displays the Multicast filtering configuration. PE
show ports security Displays the port-lock status. PE
show ports security addresses Displays current dynamic addresses in locked ports. PE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
show clock Displays the time and date of the system clock. UE
show sntp configuration Displays the SNTP configuration. PE
show sntp status Displays the SNTP status. PE
sntp authenticate Set to require authentication for received NTP traffic from
servers. GC
sntp authentication-key Defines an authentication key for SNTP. GC
sntp broadcast client enable Enables SNTP Broadcast clients. GC
sntp client enable Enables SNTP Broadcast and Anycast clients on an
interface. IC
sntp client poll timer Defines polling time for the SNTP client. GC
sntp server Configures the SNTP server to use SNTP to request and
accept NTP traffic from it.
sntp trusted-key Authenticates the identity of a system to which Simple
Network Time Protocol (SNTP) will synchronize. GC
sntp unicast client enable Enables clients to use Simple Network Time Protocol
(SNTP) predefined Unicast clients. GC
clock timezone hours-offset Sets the offset to Coordinated Universal Time. GC
no clock timezone Resets the time zone settings. GC
clock summer-time recurring Sets the summertime offset to UTC recursively every year. GC
clock summer-time date Sets the summertime offset to UTC. GC
Command Description Mode*