Dell PowerEdge M605 - Manual (Page 355)

Configuration and Image File Commands 341
Default Configuration
No description is attached to the file.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example attaches a file description to image2.
console#filedescr image2 "backedup on 03-22-05"
ftpdownload
Use the ftpdownload command to update the backup image on the switch. Users can use the boot
system image1/image2 command to appropriately load the image on next reload.
This command can be executed by a script. Password protection is not provided, and the password
is displayed on the CLI console as it is typed by the user or given in the script.
Syntax Description
ftpdownload ipaddress/path image user user name password password
• Ipaddress/path—IP address of FTP server followed by the destination directory path from
which the image file is to be downloaded. (Range: Valid IP address and directory from
which the image file is to be downloaded)
• image—Specifies the backup image on flash. (Range: None)
• Username—User name on the FTP server. (Range: Valid user name)
• Password—Password for the respective user on the FTP server. (Range: Valid password)
Command Mode
Privileged EXEC
Default Configuration
This command has no default configuration
User Guidelines
No specific guidelines.