Dell PowerEdge M605 - Manual (Page 415)

RMON Commands 407
no rmon collection history index
• index—The requested statistics index group. (Range: 1 - 65535)
• owner ownername—Records the RMON statistics group owner name. If unspecified, the
name is an empty string.
• buckets bucket-number—A value associated with the number of buckets specified for the
RMON collection history group of statistics. If unspecified, defaults to 50.
(Range: 1 - 65535)
• interval seconds—The number of seconds in each polling cycle. If unspecified, defaults to
1800. (Range: 1 - 3600)
Default Configuration
The buckets configuration is 50. The interval configuration is 1800 seconds.
Command Mode
Interface Configuration (Ethernet, Port-Channel) mode.
User Guidelines
This command cannot be executed on multiple ports using the interface range ethernet
command.
Example
The following example enables a Remote Monitoring (RMON) MIB history statistics group
on port 1/g8 with the index number "1" and a polling interval period of 2400 seconds.
console(config)#interface ethernet 1/g8
console(config-if-1/g8)#rmon collection history 1 interval 2400
rmon event
Use the rmon event command in Global Configuration mode to configure an event. To remove an
event, use the no form of this command. Also see the show rmon events command.
Syntax
rmon event index type [community text] [description text] [owner name]
no rmon event index
• index—The event index. (Range: 1 - 65535)
• type—The type of notification that the device generates about this event. Can have the
following values: none, log, trap, log-trap. In the case of log, an entry is made in the log
table for each event. In the case of trap, an SNMP trap is sent to one or more
management stations.