Dell PowerEdge M605 - Manual (Page 698)

704 OSPF Commands
www
.dell.com | support.dell.com
Area LSA Checksum.............................. 0
Import Summary LSAs............................ Enable
console#show ip ospf area 20
AreaID......................................... 0.0.0.20
External Routing............................... Import NSSAs
Spf Runs....................................... 0
Area Border Router Count....................... 0
Area LSA Count................................. 0
Area LSA Checksum.............................. 0
OSPF NSSA Specific Information.
Import Summary LSAs............................ Enable
Redistribute into NSSA......................... Enable
Default Information Originate.................. TRUE
Default Metric................................. 250
Default Metric Type............................ Non-Comparable
Translator Role................................ Candidate
Translator Stability Interval.................. 2000
Translator State............................... Disabled
show ip ospf asbr
This command displays the internal OSPF routing table entries to Autonomous System Boundary
Routes (ASBR). This command takes no options.
Syntax
show ip ospf asbr
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User EXEC mode