Dell PowerEdge M605 - Manual (Page 162)

128 Clock Commands
www
.dell.com | support.dell.com
• key-number— number (Range: 1 - 4294967295)
• value— value (Range: 1-8 characters)
Default value
No authentication is defined.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Examples
The following examples define the authentication key for SNTP.
console(config)# sntp authentication-key 8 md5 ClkKey
console(config)# sntp trusted-key 8
console(config)# sntp authenticate
sntp broadcast client enable
Use the sntp broadcast client enable command in Global Configuration mode to enable a Simple
Network Time Protocol (SNTP) Broadcast client. To disable an SNTP Broadcast client, use the no
form of this command.
Syntax
sntp broadcast client enable
no sntp broadcast client enable
Default Configuration
The SNTP Broadcast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables a Simple Network Time Protocol (SNTP) Broadcast client.
console(config)# sntp broadcast client enable