Dell PowerEdge M605 - Manual (Page 568)

568 DHCP and BOOTP Relay Commands
www
.dell.com | support.dell.com
Syntax
bootpdhcprelay enable
no bootpdhcprelay enable
Default Configuration
Disabled is the default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console#configure
console(config)#bootpdhcprelay enable
console(config)#no bootpdhcprelay enable
bootpdhcprelay maxhopcount
Use the bootpdhcprelay maxhopcount command in Global Configuration mode to configure the
maximum allowable relay agent hops for BootP/DHCP Relay on the system. Use the no form of the
command to set the maximum hop count to the default value.
Syntax
bootpdhcprelay maxhopcount integer
no bootpdhcprelay maxhopcount
• integer—Maximum allowable relay agent hops for BootP/DHCP Relay on the system.
(Range: 1-16)
Default Configuration
The default integer configuration is 4.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.