Dell PowerEdge M605 - Manual (Page 580)

580 DHCPv6 Commands
www
.dell.com | support.dell.com
Example
The following example enables DHCPv6 globally.
console#configure
console(config)#service dhcpv6
console(config)#no service dhcpv6
show ipv6 dhcp
Use the show ipv6 dhcp command in Privileged EXEC mode to display the DHCPv6 server name
and status.
Syntax
show ipv6 dhcp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the DHCPv6 server name and status.
console#show ipv6 dhcp
DHCPv6 is disabled
Server DUID:
show ipv6 dhcp binding
Use the show ipv6 dhcp binding command in Privileged EXEC mode to display the configured
DHCP pool.
Syntax
show ipv6 dhcp binding [ipv6-addr ]
• ipv6-addr—Valid IPv6 address.