Dell PowerEdge M605 - Manual (Page 496)

490 Syslog Commands
www
.dell.com | support.dell.com
Default Configuration
There is no default configuration for the command.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Example
The following example shows the clear logging file command and confirmation response.
console#clear logging file
Clear logging file [y/n]
description
Use the description command in Logging mode to describe the syslog server.
Syntax
description description
• description—Sets the description of the syslog server. (Range: 1-64 characters.)
Default Configuration
This command has no default value.
Command Mode
Logging mode
User Guidelines
After entering the view corresponding to a specific syslog server, the command can be
executed to set the description of the server.
Example
The following example sets the syslog server description.
console(config-logging)#description "syslog server 1"
level
Use the level command in Logging mode to specify the importance level of syslog messages. To
reset to the default value, use the no form of the command.