Dell PowerEdge M605 - Manual (Page 284)

262 System Management Commands
www
.dell.com | support.dell.com
show stack-port counters
Use the show stack-port counters command in Privileged EXEC mode to display summary data
counter information for all interfaces.
Syntax
show stack-port counters
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the summary stack-port counters.
console#show stack-port counters
------------TX-------------- ------------RX--------------
Data Error Data Error
Rate Rate Total Rate Rate Total
Unit Interface (Mb/s) (Errors/s) Errors (Mb/s)Errors/s) Errors
---- ----------- ------ ---------- ---------- ------ ----------
1 xg1 0 0 0 0 0 0
1 xg2 0 0 0 0 0 0
1 xg3 0 0 0 0 0 0
1 xg4 0 0 0 0 0 0
Link Status Status of the link
Link Speed Speed (Gb/sec) of the stack port link
Field Description