Dell PowerEdge M605 - Manual (Page 662)

668 Multicast Commands
www
.dell.com | support.dell.com
show ip mcast mroute
Use the show ip mcast mroute command in Privileged EXEC mode to display a summary or all the
details of the multicast table.
Syntax
show ip mcast mroute {detail | summary}
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays a summary or all the details of the multicast table.
console#show ip mcast mroute summary
Multicast Route Table Summary
Incoming Outgoing
Source IP Group IP Protocol Interface Interface List
--------------- ------------ ---------- --------- ---------------
console#show ip mcast mroute detail
Multicast Route Table
Expiry Up Time
Source Ip Group Ip Time(secs) (secs) RPF Neighbor Flags
--------- ----------- ---------- ----------- --------------- -----