Dell PowerEdge M605 - Manual (Page 790)

798 Routing Information Protocol (RIP) Commands
www
.dell.com | support.dell.com
Global route changes........................... 0
Global queries................................. 0
Default Metric................................. 12
Default Route Advertise........................ 0
Redistributing.................................
Source......................................... Connected
Metric......................................... 2
Distribute List................................ Not configured
Redistributing.................................
Source......................................... ospf
Metric......................................... 10
Match Value.................................... 'nssa-external 1'
Distribute List................................ Not configured
show ip rip interface
Use the show ip rip interface command in Privileged EXEC mode to display information related to
a particular RIP interface.
Syntax
show ip rip interface vlan vlan-id
• vlan-id—Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays information related to the VLAN 15 RIP interface.
console#show ip rip interface vlan 15