Dell PowerEdge M605 - Manual (Page 316)

298 Line Commands
www
.dell.com | support.dell.com
• console—Console terminal line.
• telnet—Virtual terminal for remote console access (Telnet).
• ssh—Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the line configuration.
console>show line
Console configuration:
Interactive timeout: Disabled
History: 10
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Telnet configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
SSH configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
speed
Use the speed command in Line Configuration mode to set the line baud rate. Use the no form of
the command to restore the default settings.