Dell PowerEdge M605 - Manual (Page 574)

574 DHCPv6 Commands
www
.dell.com | support.dell.com
no dns-server dns-server-address
• dns-server-address—Valid IPv6 address.
Default Configuration
This command has no default configuration.
Command Mode
IPv6 DHCP Pool Configuration mode
User Guidelines
DHCPv6 pool can have multiple number of domain names with maximum of 8.
Example
The following example sets the ipv6 DNS server address of 2020:1::1, which is provided to a
DHCPv6 client by the DHCPv6 server.
console(config)#ipv6 dhcp pool addrpool
console(config-dhcp6s-pool)#dns-server 2020:1::1
domain-name
Use the domain-name command in IPv6 DHCP Pool Configuration mode to set the DNS domain
name which is provided to a DHCPv6 client by the DHCPv6 server. DNS domain name is
configured for stateless server support.
Syntax
domain-name dns-domain-name
no domain-name dns-domain-name
• dns-domain-name—DHCPv6 domain name. (Range: 1-31 characters)
Default Configuration
This command has no default configuration.
Command Mode
IPv6 DHCP Pool Configuration mode
User Guidelines
DHCPv6 pool can have multiple number of domain names with maximum of 8.