Dvmrp commands, Igmp commands, Dvmrp commands igmp commands – Dell PowerEdge M605 User Manual
Page 72
34
Command Groups
www
.dell.com | support.dell.com
DVMRP Commands
IGMP Commands
Command
Description
Mode*
ip dvmrp
S
ets the administrative mode of DVMRP in the router
to active.
GC
IC
ip dvmrp metric
Configures the metric for an interface.
IC
ip dvmrp trapflags
Enables the DVMRP trap mode.
GC
show ip dvmrp
Displays the system-wide information for DVMRP.
PE
show ip dvmrp interface
Displays the interface information for DVMRP on the
specified interface.
PE
show ip dvmrp neighbor
Displays the neighbor information for DVMRP.
PE
show ip dvmrp nexthop
D
isplays the next hop information on outgoing
interfaces for routing multicast datagrams.
PE
show ip dvmrp prune
Displays the table that lists the router’s upstream prune
information.
PE
show ip dvmrp route
Displays the multicast routing information for DVMRP.
PE
*NOTE:
For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command
Description
Mode*
ip igmp
Sets the administrative mode of IGMP in the system to
active.
GC
ip igmp last-member-query-count
Sets the number of Group-Specific Queries sent before
the router assumes that there are no local members on the
interface.
IC
ip igmp last-member-query-interval Configures the Maximum Response Time inserted in
Group-Specific Queries which are sent in response to
Leave Group messages.
IC
ip igmp query-interval
Configures the query interval for the specified interface.
The query interval determines how fast IGMP Host-
Query packets are transmitted on this interface.
IC
ip igmp query-max-response-time
Configures the maximum response time interval for the
specified interface.
IC
ip igmp robustness
Configures the robustness that allows tuning of the
interface.
IC