Dell PowerEdge M605 User Manual
Page 59
Command Groups
21
match dstl4port
Adds to the specified class definition a match condition
based on the destination layer 4 port of a packet using a
single keyword, or a numeric notation.
CMC
match ethertype
Adds to the specified class definition a match condition
based on the value of the ethertype.
CMC
match ip dscp
Adds to the specified class definition a match condition
based on the value of the IP DiffServ Code Point (DSCP)
field in a packet.
CMC
match ip precedence
Adds to the specified class definition a match condition
based on the value of the IP.
CMC
match ip tos
Adds to the specified class definition a match condition
based on the value of the IP TOS field in a packet.
CMC
match protocol
Adds to the specified class definition a match condition
based on the value of the IP Protocol field in a packet using
a single keyword notation or a numeric value notation.
CMC
match source-address mac
Adds to the specified class definition a match condition
based on the source MAC address of the packet.
CMC
match srcip
Adds to the specified class definition a match condition
based on the source IP address of a packet.
CMC
match srcl4port
Adds to the specified class definition a match condition
based on the source layer 4 port of a packet using a single
keyword, a numeric notation, or a numeric range notation.
CMC
match vlan
Adds to the specified class definition a match condition
based on the value of the layer 2 VLAN Identifier field.
CMC
mirror
Mirrors all the data that matches the class defined to the
destination port specified
PCMC
police-simple
Establishes the traffic policing style for the specified class.
PCMC
policy-map
Establishes a new DiffServ policy
GC
redirect
Specifies that all incoming packets for the associated traffic
stream are redirected to a specific egress interface (physical
port or port-channel).
PCMC
service-policy
Attaches a policy to an interface in a particular direction.
GC and
IC
show class-map
Displays all configuration information for the specified
class.
PE
show classofservice dotlp-
mapping
Displays the current Dot1p (802.1p) priority mapping to
internal traffic classes for a specific interface.
PE
Command
Description
Mode*