Dell PowerEdge M605 - Manual (Page 175)

Denial of Service Commands 143
Example
The following example activates TCP Fragment Denial of Service protection.
console(config)#dos-control tcpfrag
show dos-control
Use the show dos-control command in Privileged EXEC mode to display Denial of Service
configuration information.
Syntax
show dos-control
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays Denial of Service configuration information.
console#show dos-control
SIPDIP Mode.................................... Disable
First Fragment Mode........................ Disable
Min TCP Hdr Size............................ 20
TCP Fragment Mode........................ Disable
TCP Flag Mode................................. Disable
L4 Port Mode.................................... Disable
ICMP Mode...................................... Disable
Max ICMP Pkt Size.......................... 512