Dell PowerEdge M605 - Manual (Page 507)

TACACS+ Commands 503
TACACS+ Commands
key
Use the key command in TACACS Configuration mode to specify the authentication and
encryption key for all TACACS communications between the device and the TACACS server. This
key must match the key used on the TACACS daemon.
Syntax
key key-string
• key-string—To specify the key name. For an empty string use " ". (Range: 0 - 128
characters)
Default Configuration
If left unspecified, the key-string parameter defaults to the global value.
Command Mode
TACACS Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies an encryption and authentication key of 12.
console(config-tacacs)#key 12
port
Use the port command in TACACS Configuration mode to specify a server port number.
Syntax
port port-number