Dell PowerEdge M605 - Manual (Page 311)

ACL Commands 291
Example
The following example shows the mac access-list extended rename command.
console(config)#mac access-list extended rename DELL1 DELL2
show ip access-lists
Use the show ip access-lists command in Privileged EXEC mode to display access lists applied on
interfaces and all rules that are defined for the access lists.
Syntax
show ip access-lists accesslistname
• accesslistname—The name used to identify the ACL. The range is 1-31 characters.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays IP ACLs configured on a device.
console#show ip access-lists
Current number of ACLs: 2 Maximum number of ACLs: 100
ACL Name Rules Interface(s) Vlan(s)
------------------------ ------ ------------------------- --------
ACL40 1
ACL41 1
show mac access-list
Use the show mac access-list command in Privileged EXEC mode to display a MAC access list and
all of the rules that are defined for the ACL.