Dell PowerEdge M605 - Manual (Page 51)

Command Groups 13
Password Management
lldp transmit Enables the LLDP advertise capability. IC
lldp transmit-mgmt Specifies that transmission of the local system
management address information in the LLDPDUs is
included. IC
lldp transmit-tlv Specifies which optional TLVs in the 802.1AB basic
management set will be transmitted in the LLDPDUs. IC
show lldp Displays the current LLDP configuration summary. PE
show lldp connections Displays the current LLDP remote data. PE
show lldp interface Displays the current LLDP interface state. PE
show lldp local-device Displays the LLDP local data PE
show lldp remote-device Displays the LLDP remote data PE
show lldp statistics Displays the current LLDP traffic statistics. PE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
passwords aging Implements aging on the passwords such that users are
required to change passwords when they expire. GC
passwords history Enables the administrator to set the number of previous
passwords that are stored to ensure that users do not reuse
their passwords too frequently. GC
passwords lock-out Enables the administrator to strengthen the security of the
switch by enabling the user lockout feature. When a
lockout count is configured, a user who is logging in must
enter the correct password within that count. GC
passwords min-length Enables the administrator to enforce a minimum length
required for a password. GC
show passwords configuration Displays the configuration parameters for password
configuration. PE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*