Dell PowerEdge M605 - Manual (Page 228)

200 IGMP Snooping Querier Commands
www
.dell.com | support.dell.com
• VLAN Operational State—Indicates whether IGMP Snooping Querier is in the Querier or
Non-Querier state. When the switch is in Querier state it sends out periodic general queries.
When in Non-Querier state it waits for moving to Querier state and does not send out any
queries.
• VLAN Operational Max Response Time—Indicates the time to wait before removing a Leave
from a host upon receiving a Leave request. This value is calculated dynamically from the
Queries received from the network. If the Snooping Switch is in Querier state, then it is equal
to the configured value.
• Querier Election Participate—Indicates whether the IGMP Snooping Querier participates in
querier election if it discovers the presence of a querier in the VLAN.
• Last Querier Address—Indicates the IP address of the most recent Querier from which a
Query was received.
• Last Querier Version—Indicates the IGMP version of the most recent Querier from which a
Query was received on this VLAN.
• Elected Querier—Indicates the IP address of the Querier that has been designated as the
Querier based on its source IP address. This field will be 0.0.0.0 when Querier Election
Participate mode is disabled
When the optional argument detail is used, the command shows the global information and the
information for all Querier enabled VLANs.
Syntax
show ip igmp snooping querier [{detail | vlan vlanid}]
• vlanid —Number assigned to the VLAN.
Default Configuration
This command has no default configuration
Command Mode
Privileged Exec mode
User Guidelines
Example
The following example shows querier information for VLAN 2.
console#show ip igmp snooping querier vlan 2