Bio-Rad Firmware & Software Updates - Manual (Page 93)

Data Analysis Overview
80
Temporarily Exclude Wells from Analysis
To exclude any wells from data analysis temporarily:
U SING R IGHT -C LICK
1. Right-click the well in the well selector, on a fluorescence trace, or on a point plotted on
the standard curve. To exclude multiple wells, right-click and drag to highlight multiple
wells, traces, or points.
2. From the right-click menu, choose the appropriate option:
Well > Exclude Well
Selected Wells > Exclude from Analysis
Selected Traces > Exclude these wells from Analysis
Figure 57. Right-click to exclude a well from analysis.
NOTE: To reinclude an excluded well, click on the appropriate well in the well
selector, right-click, and select Include Well XX in Analysis.
U SING THE P LATE E DITOR
1. From the Plate Setup button on the toolbar of the Data Analysis window, select View/
Edit Plate....
2. Select one or more wells in the well selector view.
3. Click Exclude Wells in Analysis (Figure 58) to exclude the selected wells. This checkbox
is at the bottom of the Plate Editor controls on the right side of the window.