Bio-Rad Firmware & Software Updates - Manual (Page 45)

Performing Runs
32
Figure 23 shows the features of the Run Details window.
Figure 23. Run Details window showing the Run Status tab.
Run Status Tab
The Run Status tab (Figure 23) shows the current status of a run in progress in the Run Details
window and provides buttons (below) to control the lid and change the run in progress.
• Run Status pane. Displays the current progress of the protocol
• Run Status buttons. Click one of the buttons to remotely operate the instrument or to
interrupt the current protocol
• Run Information pane. Displays run details
Run Status Tab Buttons
Click one of the buttons listed in Table 11 to operate the instrument from the software or to
change the run that is in progress.
NOTE: Changing the protocol during the run, such as adding repeats, does not change the
protocol file associated with the run. These actions are recorded in the Run Log.
Table 11. Run Status buttons and their functions.
Button Function
Open the motorized lid on selected instruments
WARNING! Opening the lid during a run pauses the
run during the current step and might alter the data.
Close the motorized lid on selected instruments
Add more repeats to the current GOTO step in the protocol.
This button is available only when a GOTO step is running