Bio-Rad Firmware & Software Updates - Manual (Page 14)

CFX96 Touch, CFX96 Touch Deep Well, CFX Connect, and CFX384 Touch Systems Instruction Manual
1
1 System Installation
Read this chapter for information about setting up the CFX96 Touch™, CFX96 Touch Deep
Well™, CFX Connect™ , or CFX384 Touch™ system:
• Unpacking the optical reaction module (page 1)
• System requirements (page 1)
• System overview (page 2)
• Setting up the system (page 4)
• Installing CFX Manager™ software (page 8)
• Software files (page 9)
• Running experiments (page 10)
Unpacking the Optical Reaction Module
Your CFX96™ , CFX96 Deep Well™, CFX Connect , or CFX384™ optical reaction module
shipment includes these components:
• Optical reaction module
• USB cable
• CFX Manager software installation CD
• Instruction manual
• CFX Manager software quick guides for system installation, protocol, plate, data
analysis, gene expression analysis, and qbase
PLUS
software setup
• CFX Manager software video tutorial
Remove all packing materials and store them for future use. If any items are missing or
damaged, contact your local Bio-Rad office.
System Requirements
To operate the CFX96 Touch, CFX96 Touch Deep Well, CFX Connect, or CFX384 Touch
system, use the following power sources and cables:
• Input power. 100–240 VAC, 50–60 Hz
• Indoor use. Ambient temperature of 15–31 o C. Relative humidity maximum of 80%, non-
condensing