Bio-Rad Firmware & Software Updates - Manual (Page 158)

CFX96 Touch, CFX96 Touch Deep Well, CFX Connect, and CFX384 Touch Systems Instruction Manual
145
11 Resources
Read this chapter to learn more about resources for the CFX96 Touch™, CFX96 Touch Deep
Well™, CFX Connect™, or the CFX384 Touch™ system:
• Automatic software and instrument updates (page 145)
• Retrieving data files from thermal cycler base (page 146)
• LIMS integration (page 146)
• Calibration Wizard (page 151)
• Instrument maintenance (page 153)
• Application Log (page 155)
• Troubleshooting (page 155)
• References (page 158)
Automatic Software and Instrument Updates
Software and instruments can be automatically updated using CFX Manager™ software.
The availability of updates can be determined by three methods:
1. The software automatically checks for updates each time CFX Manager software is
started and whenever a new instrument is connected to the computer while the software
is running.
2. A message indicating updates are available will be displayed at the bottom of the main
CFX Manager software window. When this message is clicked, the Updates window will
appear.
3. Selecting Help > Check For Updates.
When updates are available, the Updates window allows the following options:
• If only a software update is available, select Update.
• If both software and instrument updates are available, by default, both of these
updates will be checked. Updating the software requires an instrument update for
any connected instruments to ensure proper communication.
• Instruments can be updated without updating the software by unchecking the
software update box.