Bio-Rad Firmware & Software Updates - Manual (Page 18)

CFX96 Touch, CFX96 Touch Deep Well, CFX Connect, and CFX384 Touch Systems Instruction Manual
5
2. Lift the optical reaction module using the handle indents above the side air vents
(Figure 4).
Figure 4. Lifting the optical reaction module into the C1000 Touch chassis.
3. Position the module in the reaction module bay of the C1000 Touch or CFX Connect
chassis, leaving about 2 cm of space in the front. When in the chassis bay, the optical
module should be covering the Bio-Rad logo in front of the bay of the C1000 Touch or
CFX Connect chassis.
CFX96 optical
reaction module
C1000 Touch
chassis
thermal cycler