Bio-Rad Firmware & Software Updates - Manual (Page 46)

CFX96 Touch, CFX96 Touch Deep Well, CFX Connect, and CFX384 Touch Systems Instruction Manual
33
Real-time Status Tab
The Real-time Status tab (Figure 24) shows real-time PCR data collected at each cycle during
the protocol after the first two plate reads.
Figure 24. The Real-time Status tab displays the data during a run.
Skip the current step in the protocol. If you skip a GOTO step,
the software verifies that you want to skip the entire GOTO
loop and proceed to the next step in the protocol
Flash the LED on the selected instrument to identify the
selected blocks
Pause the protocol
NOTE: This action is recorded in the Run Log.
Resume a protocol that was paused
Stop the run before the protocols ends, which may alter your
data
Table 11. Run Status buttons and their functions. (continued)
Button Function