Bio-Rad Firmware & Software Updates - Manual (Page 43)

Performing Runs
30
• Edit Selected button. Open the currently selected plate in the Plate Editor
Figure 21. Plate tab window.
Start Run Tab
The Start Run tab (Figure 22) includes a section for checking information about the run that is
going to be started, including the selected protocol and plate files, and a section for selecting
the instrument block.
• Run Information pane. View the selected Protocol file, Plate file, and data acquisition
Scan Mode setting. Enter optional notes about the run in the Notes box
• Start Run on Selected Block(s) pane. Select one or more blocks, edit run parameters
(if necessary), and then click the Start Run button to begin the run