Bio-Rad Firmware & Software Updates - Manual (Page 59)

Plates
46
Figure 31. Plate Editor window.
Plate Editor Menu Bar
The menu bar in the Plate Editor window provides the menu items shown in Table 15.
Table 15. Plate Editor menu bar.
Menu Item Command Function
File Save Save the plate files
Save As Save the plate file with a new file name
Close Close the Plate Editor
Settings Plate Size Select a plate size that reflects the number of wells in
the instrument block. Choose 384-well for the CFX384
Touch™ system or 96-well for the CFX96 Touch™,
CFX96 Touch Deep Well™, or CFX Connect™ system
NOTE: Plate Size must be the same as the block size in
the instrument on which the run will proceed.
Plate Type Choose the type of wells in the plate that holds your
samples, including BR White and BR Clear. For
accurate data analysis, the plate type must be the same
as the plate well type used in the run
NOTE: You must calibrate new plate types (page 151).
Number Convention Select or cancel the selection for Scientific Notation