Rockwell Automation 1761 MicroLogix 1000 Programmable Controllers - Manual (Page 9)

Summary of Changes
soc–i
Summary of Changes
The information below summarizes the changes to this manual since the last
printing as Publication 1761-6.3 — December 1997.
To help you find new information and updated information in this release of the
manual, we have included change bars as shown to the right of this paragraph.
New Information
The table below lists sections that document new features and additional
information about existing features, and shows where to find this new information.
For This New Information See
Power supply inrush page 1–13
Updated Information
Changes from the previous release of this manual that require you to reference
information differently are as follows:
•
The DeviceNet communications information has been updated; see chapter 3,
Connecting the System.
•
For updated information on automatic protocol switching, see chapter 3,
Connecting the System.
•
The MicroLogix 1000 programmable controllers’ VA ratings and power supply
inrush specifications have been updated; see appendix A, Hardware Reference.
•
The DF1 Full-Duplex and DH-485 configuration parameters have been updated;
see appendix D, Understanding Communication Protocols.