Rockwell Automation 1761 MicroLogix 1000 Programmable Controllers - Manual (Page 12)

Preface MicroLogix 1000 Programmable Controllers User Manual
P–2
Who Should Use this Manual
Use this manual if you are responsible for designing, installing, programming, or
troubleshooting control systems that use MicroLogix
t 1000 controllers.
You should have a basic understanding of electrical circuitry and familiarity with
relay logic. If you do not, obtain the proper training before using this product.
Purpose of this Manual
This manual is a reference guide for MicroLogix 1000 controllers. It describes the
procedures you use to install, wire, program, and troubleshoot your controller. This
manual:
•
explains how to install and wire your controllers
•
gives you an overview of the MicroLogix 1000 controller system
•
provides the MicroLogix 1000 controllers’ instruction set
•
contains application examples to show the instruction set in use
See your programming software user manual for information on programming your
MicroLogix 1000 controller. For information on using the Hand-Held Programmer
with the MicroLogix 1000 controllers, see the MicroLogix 1000 with Hand-Held
Programmer (HHP) User Manual, Publication 1761-6.2.