Rockwell Automation 1761 MicroLogix 1000 Programmable Controllers - Manual (Page 13)

Preface
P–3
Contents of this Manual
Tab Chapter Title Contents
Preface
Describes the purpose, background, and scope
of this manual. Also specifies the audience for
whom this manual is intended.
1
Installing Your
Controller Provides controller installation procedures and
system safety considerations.
Hardware 2 Wiring Your Controller Provides wiring guidelines and diagrams.
3 Connecting the System
Gives information on wiring your controller
system for the DF1 protocol or DH-485 network.
4 Programming Overview
Provides an overview of principles of machine
control, a section on file organization and
addressing, and a program development model.
5 Using Analog
Provides information on I/O image file format,
I/O configuration, input filter and update times,
and conversion of analog data.
6 Using Basic Instructions
Describes how to use ladder logic instructions
for relay replacement functions, counting, and
timing.
7
Using Comparison
Instructions
Describes how to use the instructions to
compare values of data in your ladder logic
program.
Programming
8 Using Math Instructions
Describes how to use the ladder logic
instructions that perform basic math functions.
Programming
9
Using Data Handling
Instructions
Describes how to perform data handling
instructions, including move and logical
instructions and FIFO and LIFO instructions.
10
Using Program Flow
Control Instructions Describes the ladder logic instructions that affect
program flow and execution.
11
Using Application
Specific Instructions Describes the bit shift, sequencer and STI
related instructions.
12
Using High-Speed
Counter Instructions Describes the four modes of the high-speed
counter and its related instructions.
13
Using the Message
Instruction
Provides a general overview of the types of
communication, and explains how to establish
network communication using the message
instruction.
Troubleshooting 14
Troubleshooting Your
System Explains how to interpret and correct problems
with your MicroLogix 1000 controller system.