Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 70)

03
.
02
Han
E / EE
Han E ® Technical characteristics
Features
• Available in different termination techniques
• Han E ® Crimp terminal
• Han E ® Screw terminal
• Han ® ES Cage-clamp terminal
• Han ® ESS Cage-clamp terminal
• Han ® EE Crimp terminal
• Han ® EEE Crimp terminal
• Han E ® covers a wide range of cross core sections
• Wire protection for Han E ® screw
• Suitable for hoods/housings of series Han ® B,
Han ® M, Han ® EMV, Han ® HPR, Han ® Easy Hood
Specifications DIN EN 60 664-1
DIN EN 61 984
Approvals , ,
Inserts
Number of contacts 6, 10, 16, 24, 32 (2x 16),
48 (2x 24) + PE
Electrical data
acc. to EN 61 984 16 A 500 V 6 kV 3
Rated current 16 A
Rated voltage 500 V
Rated impulse voltage 6 kV
Pollution degree 3
Pollution degree 2 also 16 A 400/690 V 6 kV 2
Rated voltage
acc. to UL/CSA 600 V
Insulation resistance ≥ 10 10 Ω
Material polycarbonate
Limiting temperatures -40 °C ... +125 °C
Flammability acc. to UL 94 V 0
Mechanical working life
- mating cycles ≥ 500
Contacts
Material copper alloy
Surface - hard-gold plated 2 µm Au over 3 µm Ni
Surface - hard-silver plated 3 µm Ag
Contact resistance ≤ 1 mΩ
Crimp terminal - min 0.14 mm² / AWG 26
Crimp terminal - max 4 mm² / AWG 12
Screw terminal - min 0.75 mm² / AWG 18
Screw terminal - max 2.5 mm² / AWG 14
Tightening/test torque 0.5 Nm
Stripping length 7.5 mm
Hoods/Housings
Material aluminium die-cast
Surface powder-coated
Locking element Han-Easy Lock ®
Flammability acc. to UL 94 V 0
Hoods/Housings seal NBR
Limiting temperatures -40 °C ... +125 °C
Degree of protection acc. to DIN EN 60 529
for coupled connector IP 65
Further selection of hoods/housings see chapter 31
Accessories
Crimping tools chapter 99
Cable clamps chapter 95
Coding of hoods/housings chapter 95
Label acc. to CSA-approval chapter 95
Han-Snap ® chapter 11
Assembly plates for test connector chapter 95
Special insert fixing screws chapter 95