Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 147)

08
.
06
Han
AV
Han D ® AV Distributor
Features
• Easy mounting direct adjacent to terminal block
connector Han D ® AV
• By using of fixing elements mountable on standard
rails
• Screw terminal with integrated wire protection
Mounting example
Distributor
on standard rail
Distributor
with teminal block connector
Han D ® AV
Identification
The individual terminals have the same identification as on the
mating face. In addition each circuit may be separately labelled
with identification strips fitted in the adjacent slots.
Technical characteristics
Specifications DIN EN 60 664-1
DIN EN 61 984
Approvals ,
Distributor
Number of contacts 20, 2 x 10, 4 x 4
Electrical data
acc. to EN 61 984 16 A 400/690 V 6 kV 3
Rated current 16 A
Rated voltage conductor - ground 400 V
Rated voltage conductor - conductor 690 V
Rated impulse voltage 6 kV
Pollution degree 3
Pollution degree 2 also 16 A 480/830 V 6 kV 2
Rated voltage
acc. to UL/CSA 600 V
Insulation resistance ≥ 10 10 Ω
Material polycarbonate
Limiting temperatures r& r&
Flammability acc. to UL 94 V 0
Mechanical working life
- mating cycles ≥ 500
Contacts
ContactsMaterial copper alloy
Surface
- termination side tin plated
Screw terminal
- Wire gauge 1) 0.2 ... 2.5 mm²
- AWG 24 ... 14
- Tightening/test torque 0.5 Nm
Identification strips
the following identification strips may be used
HARTING
"https://b2b.harting.com/ebusiness/en/
09 21 000 9971
"
Murrplastik KPX 5/10-5
Phoenix
4K-DST 5
ZB 5
DS 5
1) geometric wire gauge