Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 201)

Han
Q
13
.
12
Han ® Q 5/0 Quick Lock
Features
• Innovative Han-Quick Lock ® termination technology
with up to 20% reduced wiring times
• Field assembly without special tools
• Compatible with Han ® Q 5/0 standard crimp inserts
• Compatible with plastic and metal hoods of series
Han ® 3 A
• Vibration and shock resistant
Attention
By using in Han ® 3 A HPR hoods/housings the sealing on the
insert has to be removed.
Current carrying capacity
The current carrying capacity of the connectors is limited by the
thermal load capability of the contact element material including
the connections and the insulating parts. The derating curve
is therefore valid for currents which flow constantly (non-inter-
mittent) through each contact element of the connector evenly,
without exceeding the allowed maximum temperature.
Measuring and testing techniques according to
DIN EN 60 512-5
Operating current
Ambient temperature
Wire gauge: ➀ 1.0 mm²
➁ 1.5 mm²
➂ 2.5 mm²
Technical characteristics
Specifications DIN EN 60 664-1
DIN EN 61 984
Approvals
Inserts
Number of contacts 5 + PE
Electrical data
acc. to EN 61 984 16 A 230/400 V 4 kV 3
Rated current 16 A
Rated voltage conductor - ground 230 V
Rated voltage conductor - conductor 400 V
Rated impulse voltage 4 kV
Pollution degree 3
Rated voltage
acc. to UL/CSA 600 V
Insulation resistance ≥ 10 10 Ω
Material polycarbonate
Limiting temperatures -40 °C ... 125 °C
Flammability acc. to UL 94 V 0
Mechanical working life
- mating cycles ≥ 500
Contacts
Material copper alloy
Surface
- hard-silver plated 3 µm Ag
Contact resistance ≤ 1 mΩ
Termination Han-Quick Lock ®
blue slide
Terminal wire gauge
0.5 ... 2.5 mm 2
(AWG 20 - 14)
max. Insulation diameter 3.6 mm
black slide
Terminal wire gauge
0.25 ... 1.5 mm 2
(AWG 23 - 16)
max. Insulation diameter 3.0 mm
Hoods/Housings
Selection of hoods/housings see chapter 31
Plastic hoods/housings
Material polycarbonate
Flammability acc. to UL 94 V 0
Degree of protection acc. to DIN EN 60 529
for coupled connector IP 67
Hoods/Housings, metal
Material zinc die-cast
Degree of protection acc. to DIN EN 60 529
for coupled connector IP 44
IP 67 is achieved with seal
screw
"https://b2b.harting.com/ebusiness/en/
09 20 000 9918
"
Accessories
Cable clamps chapter 95
Sealing screw chapter 95