Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 33)

Han
00
.
27
M 20
M 25
M 32
M 40
M 50
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 mm
M 40
M 40
M 32
M 32
M 25
M 25
M 20
M 20
M 20
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 mm
Pg 11
Pg 13.5
Pg 16
Pg 21
Pg 29
Pg 36
Pg 42
Pg
Pg 29
Pg 29
Pg 29
Pg 21
Pg 21
Pg 16
Pg 16
Pg 13.5
Pg 11
Pg 11
Cross Reference from Pg thread to metric cable thread
The Cross Reference table shows the correlation
between the Pg versions and the new metric types.
Please notice that the maximum cable diameter will
be reduced by the new metric cable glands.
Below is shown the cable range of metric glands:
The reason for the new product offerings is the publication of the international DIN EN 50262 metric thread
specification. The existing Pg series, Pg 7 to Pg 48 will be, in time, replaced by the metric series M 12 to M
63.
The adoption of metric threads considerably simplifies the understanding and specification of glands as the
product type description contains the thread dimension. E.g. M 20 refers to 20 mm thread diameter.
To differentiate the metric threaded hoods and housings
from the previous Pg versions metric types will be marked with
M .
Cross Reference
Metric
Cable
The diagram shows different cable-diameters,
being dependent on wire gauges and number
of conductors.
All data are averages for commercial cables.
Cable-Ø
Conductors