Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 49)

Han
D / DD
02.
05
Han DD ® Technical characteristics
Features
• High density of crimping contacts, up to 216
contacts/connector
• Time saving rapid termination by use of crimping
contacts
• For requirements up to 250 V / 10 A
• Gold and silver contacts available
• Suitable for thermo- and 1 mm F.O. contacts
Specifications DIN EN 60 664-1
DIN EN 61 984
Approvals , ,
Inserts
Number of contacts 24, 42, 72, 108, 144, 216,
144 (2x 72), 216 (2x 108)
+ PE
Electrical data
acc. to EN 61 984 10 A 250 V 4 kV 3
Rated current 10 A
Rated voltage 250 V
Rated impulse voltage 4 kV
Pollution degree 3
Pollution degree 2 also 10 A 230/400 V 4 kV 2
Rated voltage
acc. to UL/CSA 600 V
Insulation resistance ≥ 10 10 Ω
Material polycarbonate
Limiting temperatures -40 °C ... +125 °C
Flammability acc. to UL 94 V 0
Mechanical working life
- mating cycles ≥ 500
Contacts
Material copper alloy
Surface - hard-gold plated 2 µm Au over 3 µm Ni
Surface - hard-silver plated 3 µm Ag
Contact resistance ≤ 3 mΩ
Crimp terminal - min 0.14 mm² / AWG 26
Crimp terminal - max 2.5 mm² / AWG 14
Hoods/Housings
Material aluminium die-cast
Surface powder coated
RAL 7037 (grey)
Locking element Han-Easy Lock ®
Flammability acc. to UL 94 V 0
Hoods/Housings seal NBR
Limiting temperatures -40 °C / 125 °C
Degree of protection acc. to DIN EN 60 529
for coupled connector IP 65
Accessories
Crimping tools chapter 99
Cable clamps chapter 95
Coding of hoods/housings chapter 95
Label acc. to CSA-approval chapter 95
Han-Snap ® chapter 11
Assembly plates for test connector chapter 95
ATTENTION!
Guide pins and bushes are prescribed for the following
connectors: 15, 25, 40, 50, 64, 80 and 128 poles
(see chapter 95).